0902874849 - 0981556849

VAN XẢ NƯỚC NUFORS-CR, 3805

  • (1 đánh giá)
  • Nhà sản xuất: JORC
  • SKU: 3805

Nơi sản xuất: HÀ LAN

Giá: Gọi liên hệ

Lượt xem: 1.107

Đặt mua ngay

VAN XẢ NƯỚC NUFORS-CR, 3805
Hãng sản xuất: JORC
Mã số: 3805
Model máy: NUFORS-CR
VAN XẢ NƯỚC TỰ ĐỘNG KIỂU PHAO
HÃNG SẢN XUẤT: JORC
XUẤT XỨ: HÀ LAN
MODEL: NUFORS-CR
MÃ SỐ: 3805 (1/2'', 0-16 bar)
Lưu lượng cho máy nén khí 100m3/phút
Lỗ xả lên đến 6 mm
Áp làm việc max: 3-16 bar
Kết nối ren vào: 1/2'' (21mm)
Kết nối ren ra: 1/4''
Ứng dụng: Lắp đặt ở những chỗ cần xả lưu lượng lớn như (Máy sấy khí, Bình chứa khí, ...)

Xem thêm: VAN XẢ NƯỚC NUFORS-CR|3805

Đánh giá của bạn về sản phẩm này:

Sản phẩm cùng danh mục

Thông số kỹ thuật

Bảo hành

Thông tin sản phẩm

 The NUFORS-CR removes condensate from compressed air systems without using electricity and without the unnecessary loss of compressed air.

The discharge process is automatic and is based on a 3/2 way level controlled valve principle that operates a piston type direct acting valve. The advantage of this valve principle is that the NUFORS-CR’s orifice can be 6 mm, offering an increased reliability factor.

The NUFORS-CR is ideally suited in applications where power is not available, too expensive or not reliable. The NUFORS-CR features a specially treated robust aluminium housing suitable for oil lubricated and oil-free applications.

In addition, the NUFORS-CR can be applied in applications that demand a higher IP rating (International Protection rating or Ingress Protection). The NUFORS-CR offers an IP68/NEMA6 rating.

FEATURES

Integrated strainer to protect the valve.

Test feature for routine testing.

Robust aluminium housing with three inlet options, offering you installation flexibility.

  • Competitive ‘true green’ solution.
  • No operating costs.
  • No electricity required - install and go!
  • Operating pressure up to 16 bar.
  • Reduced stocking costs - 1 model covers 100 m³/min.
  • Suitable for any type of compressed air system.
  • No complicated sizing charts required.
  • Compact and unique design.
  • Successful draining of condensate due to large orifice (also heavily emulsified condensate).
  • Incredibly easy and quick to install and to service.
  • No complicated control air line and pressure regulator required.
  • Integrated strainer.
  • Top and side inlets available.
  • Test feature.
  • Robust aluminium housing.
  • Direct acting valve construction for a reliable condensate discharge operation.

SPECIFICATIONS

MAX. COMPRESSOR CAPACITY

100 m³/min. (3500 CFM)

MAX. DRAINAGE CAPACITY

1062 liters condensate per hour at 16 bar

MIN./MAX. SYSTEM PRESSURE

3 - 16 bar (44 - 230 psi)

MIN./MAX. MEDIUM TEMPERATURE

1 - 50 °C (34 - 122 °F)

MIN./MAX. AMBIENT TEMPERATURE

1 - 50 °C (34 - 122 °F)

ENCLOSURE PROTECTION RATING

IP68 (NEMA6)

INLET CONNECTIONS

1/2″ BSP or NPT, 3 inlet options

INLET HEIGHT

12 cm (top) and 9.7 & 1.5 cm (side)

OUTLET CONNECTION

1/4″ BSP, with brass hose barb adapter

VALVE TYPE

Direct acting

VALVE ORIFICE

6 mm

VALVE SEALS

FPM

SERVICEABLE VALVE

Yes

INTEGRATED MESH STRAINER

Yes

HOUSING MATERIAL

Corrosion resistant aluminium, EP coating

TEST FEATURE

Yes

Scroll